How Thick Should Recycled Asphalt Be?

How thick should asphalt millings be?

2 inches thickIt also needs to be at least 2 inches thick when brand new and applied profesionally on a proper sub base.

2 inches is good for auto traffic, but not so much for heavy vehicles, or RV’s..

Is recycled asphalt good to use on driveway?

Recycled Asphalt Defined When it’s compacted, the material is able to harden and bind together. This makes it a great pick for use on driveways because it serves as a strong and cost-efficient base or sub-base material.

How much recycled asphalt do I need?

The average residential driveway is 608 square feet or 16 feet wide by 38 feet long. To cover that area with 3 to 4 inches of asphalt millings, homeowners will need to purchase 7.6 tons of recycled asphalt.

Is crushed asphalt cheaper than gravel?

Although this is a common choice for many people, there are actually more benefits to picking a driveway that features asphalt millings, instead. … It can withstand almost any type of temperature, is known for costing less than regular gravel, and does not have to be maintained as much as a typical gravel driveway.

How long does it take for asphalt millings to harden?

24 hoursHow Long Does It Take For Asphalt Millings To Harden? After spreading and compacting your millings, leave it to cure for 24 hours. A great thing about asphalt millings is they will actually continue to harden beyond 24 hours as well.

How much does it cost to asphalt 1 acre?

The PAVE-A-LOT works just as well as the expensive units but sells for a fraction of the cost. Every aspect of the PAVE-A-LOT is easy to learn and the paving can be done at your convenience. This method of paving will save you at least half the cost, which is about $10,000.00 to $12,000.00 per acre.

Should recycled asphalt be sealed?

Just as in the case of new asphalt, recycled asphalt should be sealed every two to three years, and cracks should be sealed on an ongoing, regular basis.

How much does a dump truck load of asphalt cost?

The average price of good quality asphalt is $85 to $150 per ton. Then, how much is a dump truck load of asphalt? A concrete driveway 90 feet long and ten feet wide would be around $1800 for materials plus an additional $2000 or so for labor, for a total cost of nearly $4000.

How many square feet will 1 ton of asphalt cover 2 inches thick?

80 square feetIn terms of bulk price, asphalt is priced by the ton. One ton of asphalt covers about 80 square feet with 2 inches of material or 160 square feet with 1 inch of material.

What can you do with old asphalt?

Old asphalt is usually sorted and processed, so it can be used for other paving jobs. Asphalt that has been reclaimed from an old project can be converted into an aggregate mixture that is used to create new asphalt. Thus, old asphalt is a valuable, eco-friendly material that has a multitude of uses.

Is crushed asphalt toxic?

It has generally performed very well when mixed with aggregate and well compacted. Also the material has been shown to have toxic leachates or components including polycyclic hydrocarbons and lead. Concentrations are typically low, but can exceed health standards and can be a source of water quality contamination.

Does recycled asphalt get hard?

Recycled asphalt can harden over time, which some might assume is a benefit… but it’s NOT! In a perfect world, if it were to harden evenly, recycled asphalt would be an excellent option. But unfortunately it doesn’t harden evenly. Because of this, potholes can form that are virtually impossible to fix.

What is asphalt rejuvenator?

An asphalt rejuvenator penetrates the asphalt well below the surface to chemically revitalize and protect the asphalt binder by replacing the tars and oils lost due to oxidation.

Can you seal asphalt millings?

Just like new asphalt, you can seal a recycled asphalt driveway. Many homeowners can seal their new asphalt driveways by themselves, but asphalt millings are a little trickier. … For sealing asphalt millings, it’s recommended you contract an asphalt professional.

How much does a load of crushed asphalt cost?

Crushed and recycled asphalt millings cost $25 to $50 per cubic yard, $10 to $27 per ton, or $0.50 to $2 per square foot from quarries or landscape companies without delivery. With delivery in smaller quantities, crushed asphalt costs $72 per ton or up to $100 per cubic yard.

Can I Asphalt my own driveway?

Making your own asphalt driveway is hard work, and not a job for one person. … If you have friends who will help you, it is possible to save a lot of money by doing your own driveway, even after the cost of rental equipment is factored in.

What is the cheapest way to do a driveway?

Gravel driveways are hands-down the most affordable option upfront. Asphalt driveways place second in cost, followed by cement and pavers. Although gravel driveways are the least expensive initially, they require the most maintenance long-term.

Is asphalt cheaper than concrete?

Cost. The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.