Question: Can I Put 10w40 Instead Of 5w30?

Should I use thicker oil in an older engine?

A: Yes.

This is a practical method to improve oil pressure in an older, high-mileage engine.

The slightly thicker oil film from the heavier base weight oil — 10W — can help protect worn engine bearings as well..

What happens if you put wrong oil in car?

The brand of motor oil matters little, but its viscosity grade (10W-30, for example) is important. … Using the wrong oil can lead to reduced lubrication and shorter engine life. If the manual says to use synthetic oil, do so.

Will thicker oil damage my engine?

Not only that, but the engine will waste energy pumping the thicker motor oil, reducing fuel economy. Since thicker oils don’t transfer heat as well as thinner oils, operating temperatures will increase, too, possibly leading to accelerated chemical break down and harmful sludge and deposits.

Should I use 10w30 or 5w30?

5w30 is a great multigrade oil for use in low starting temperatures as well as high summer temperatures. It is also more fuel efficient since it creates less drag on the bearings and moving engine parts. 10w30 is thicker and may provide better sealing capability for older engines.

What is 10w 40 oil for?

The lower the “W” number the better the oil’s cold temperature/cold start performance. The 40 in a 10w-40 simply means that the oil must fall within certain viscosity limits at 100°C. This is a fixed limit and all oils that end in 40 must achieve these limits.

Can I put 10w30 instead of 5w30?

Most oils will mix perfectly, provided they have a similar synthetic. Therefore, there is no problem in mixing 10w30 and 5w30 since one will be topping up. Mixing the viscosity of oils will not have any effect on the engine. 5w30 and 10w30 engine oils have close viscosity, and thus there is no harm in mixing them.

Can I put 10w40 instead of 5w40?

10w40 is thicker than 5w40, ONLY when cold. At operating temperature it is exactly the same. … Multi-viscosity oils with a lower W number are specifically designed to flow better, and thus lubricate better, at very low temperatures. There is no need to use a 5w-40 if the vehicle only requires 10w-40.

Will thicker oil stop lifter noise?

If the oil is too thick then it will not pass through the tiny holes resulting in an increase in friction. The increased will not only lead to noisy lifters, but it may also increase the temperature a little bit. On the contrary, if the oil is too thin, it won’t provide proper lubrication as well as padding.

When should I use 10w 40 oil?

When to Use 10w30 vs 10w40 Using 10w30 oil in cold weather will help reduce excessive oil temperatures and drag as the engine warms up. Using 10w40 oil in the summer will help the oil stick to internal components in high temperatures, avoiding the wear and tear from metal-to-metal contact between moving parts.

Is 10w40 good for winter?

Yes, although they are both technically 10w oils, a 10w-40 is much thicker in cold conditions compared to a 10w-30.

Which is better 5w30 or 10w40?

The difference is in the viscosity of each at different temperatures. … The 5w30 oil will flow better at low temperatures than the 10w40 oil. This means that the 5w30 oil will protect the engine better at low temperatures, usually when the engine is just starting or during weather conditions such as winter.

What if I use 5w20 instead of 5w30?

Even though there is not much difference in the levels of protection you get from 5w20 and 5w30 motor oils, there is a slight difference in their viscosity. … However, if you live in a colder climate, you would want thinner oil that will heat up quickly, which means 5w20 will definitely a better option for you.

What oil is best for old engines?

When you’re choosing the best oil for older cars or high mileage engines, there are several criteria you can look at.Pennzoil High Mileage Conventional Motor Oil. … Castrol GTX Part-Synthetic High Mileage. … Valvoline MaxLife High Mileage Synthetic Blend. … Mobil1 High Mileage Engine Oil. … Amsoil Premium Protection Motor Oil.More items…•

Is it OK to mix old and new oil?

When you mix new and old oil, the new oil becomes “watered down” with the lack of interfacial tension and strains to do its’ job. Be sure to have your oil changed as soon as possible.

What happens if I use 15w40 instead of 5w30?

5w30 provides best cold start properties. Using 15w40 instead of 5w30 will increase your fuel consumption because of more load on your engine’s crank. No it won’t blow off,you will just wear your engine out quicker because the oil won’t flow to the moving parts as quickly !

For Example: 10W30 Low viscosities are good for cold temperatures (hence the “W” association) because the oil is thinner. Thinner motor oil flows more easily and moves quickly. When you start a cold engine up again, motor oil needs to travel to the top of the engine, where it trickles back down.

Is 5w30 good for high mileage?

You will be just fine with regular 5W-30 that high mileage isn’t going to make your engine last any longer. If you are concerned about wear or if you oil pressure is lower increase to 10W-30 that will do more than high mileage oil ever will.

Does it matter what oil you put in your car?

No. Switching brands is not harmful to your engine as long as you choose an oil marked with the API donut of the same level, e.g., API SN. … You may give up enhanced performance if you switch from synthetic or high mileage to conventional oil. MYTH: When motor oil becomes dark, that means it’s time to change it.