Question: What Size Should A Fence Post Be?

Is 2 feet deep enough for fence posts?

The minimum depth that you should dig your fence post holes for panel sections is 2 feet.

A general formula is to dig the holes one-third to one-half of the post’s aboveground height.

The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts..

What size post should I use for a 6 foot fence?

The depth of the post hole needs to be 1/3 to 1/2 the height of your fence. For example, if you are building a fence that’s 6 feet tall, you will need a hole that is at least 2 feet deep. That also means that you’d need to use an 8-foot post.

How deep should a 8 foot fence post be?

In general, holes should be at least 3 feet deep for posts that extend 8 feet or more above ground level.

Will wooden posts rot in concrete?

Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. … First, the posts should be set on top of a bed of coarse gravel 3 to 6 inches deep, so the base of the post is in contact with the gravel.

How many posts will a bag of Postcrete do?

You’ll need to bury the posts at least 2ft In the ground. As for how many bags of postcrete you need per post, that’s purely dependant on how big you make the post holes. As a rule of thumb, when using standard post hole diggers, I average 1 bag per post. For larger holes I would allow 1.5 bags to 2 bags per hole.

What size fence posts should I use?

Calculate the post lengths If you’re setting wooden or concrete posts in concrete you’ll need 8ft (2.4m) posts for a 6ft (1.828m) fence – i.e. your posts are 2ft (0.6m) longer than the fence height. Use 4in x 4in posts for fences of 5ft and over and 3in x 3in posts for anything under 5ft.

Should I use 4×4 or 6×6 fence posts?

Instead of 4×4 posts, go with 6×6 posts. The extra size makes a huge difference. It’s a smart place to invest a little extra in your fence, because if your posts distort after they have been set in the ground with concrete, they are extremely difficult to replace.

Is 1 ft deep enough for fence post?

You should always bury one-third of your fence post underground. … This means that unless you are building a 2-foot fence, which is unlikely in any garden, a 1-foot hole will not be deep enough to support your post. For main and gateposts, you should dig the holes an additional 6 inches deep.

Should I use concrete for fence posts?

Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place.

How many bags of concrete do I need for a fence post?

Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.

How do you keep fence posts from rotting in concrete?

Tamp down the gravel. You can use concrete, if desired, but the moisture in the concrete can sometimes cause wooden posts to rot more quickly, while the gravel allows water to drain quickly away from the fence post and into the soil.